May 26

Step-by-Step Guide: Installing Wall Sconces

Wall sconces are an excellent addition to any home, providing functional and aesthetic lighting. This step-by-step guide will explore installing wall sconces in your home. Following our instructions, you can achieve a cozy and stylish ambiance while adding a personal touch to your living space.  

Tools and Materials  

Before you begin the installation procedure, ensure you have the following tools:  

  • Screwdriver (Phillips or flathead)  
  • Wire stripper  
  • Needle-nose pliers  
  • Voltage tester  
  • Tape measure  
  • Pencil or marker  
  • Level  

Gather the necessary materials:  

  • Wall sconces  
  • Mounting brackets  
  • Screws  
  • Wire connectors  
  • Electrical tape  
  • Wire nuts  
  • Wire cable  

Pre-Installation Preparations  

1. Switch Off the Power 

  • Locate the circuit breaker that maintains the control to the area where you'll install the wall sconces.  
  • Switch off the circuit breaker to ensure your safety throughout the installation process.  

2. Mark the Wall for Sconce Placement 

  • Measure and mark the desired height and position of the wall sconces on the wall.  
  • Use a level to ensure the markings are straight and even.  

3. Check for wiring Behind the Wall 

  • Utilize a voltage tester to confirm that there are no live wires in the area where you'll installWthe sconces.  
  • If you encounter live wires, consult a professional electrician to handle the situation.  

Wiring the Wall Sconces  

1. Strip the Wires 

  • Strip around 1/2 inch of insulation from the ends of the wires that appear on the wall and the wires on the back of the wall sconces.  

2. Connect the Wires  

  • Twist the uncovered ends of the wires together, matching the corresponding colors (black to black, white to white).  
  • Secure the connection with wire connectors, covering them with electrical tape for safety.  

3. Secure the Connections  

  • Place the connected wires back into the electrical box, ensuring enough space for the wall sconce to fit correctly.  
  • Use wire nuts to fasten the wires to the electrical box, keeping them securely in place.  

Mounting the Wall Sconces  

1. Attach the Mounting Bracket 

  • Position the mounting bracket on the wall, aligning it with the marked placement.  
  • Secure the bracket to the wall using screws and a screwdriver.  

2. Screw in the Wall Sconce 

  • Carefully align the holes on the back of the wall sconce with the screws on the mounting bracket.  
  • Push the sconce against the wall and tighten the screws to hold it in place.  

3. Adjust the Positioning 

  • Ensure that the sconce is level and straight using a level.  
  • Make any necessary adjustments by loosening the screws and repositioning the sconce.  

Finalizing the Installation  

1. Test the Sconces 

  • Switch on the circuit breaker to restore power.  
  • Please turn on the wall sconces and verify that they are functioning correctly.  

2. Clean Up the Workspace 

  • Remove any debris or packaging materials from the installation area.  
  • Wipe down the wall sconces and surrounding area to ensure a clean finish.  

3. Restore Power 

  • Switch off the circuit breaker once again to finalize the installation.  
  • Double-check that all connections are secure and safely enclosed in the electrical box.  


Congratulations! You have successfully installed wall sconces in your home. Enjoy the new ambiance and the functional lighting they provide. With this step-by-step guide, you can confidently tackle future DIY home lighting projects

Disclosure: participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to and affiliated sites.

You May Also Like

June 19, 2023

Captivating Patio String Light Ideas – Enhance Your Outdoor Space

June 18, 2023

Festive Christmas String Light Ideas: Outdoor & Indoor Decorations
Leave a Reply

Your email address will not be published. Required fields are marked

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}